Sunday, 2 October 2011

Chemical bond

A chemical bond is an attraction between atoms that allows the formation of chemical substances that contain two or more atoms. The bond is caused by the electromagnetic force attraction between opposite charges, either between electrons and nuclei, or as the result of a dipole attraction. The strength of chemical bonds varies considerably; there are "strong bonds" such as covalent or ionic bonds and "weak bonds" such as dipole-dipole interactions, the London dispersion force and hydrogen bonding.
Since opposite charges attract via a simple electromagnetic force, the negatively charged electrons orbiting the nucleus and the positively charged protons in the nucleus attract each other. Also, an electron positioned between two nuclei will be attracted to both of them. Thus, the most stable configuration of nuclei and electrons is one in which the electrons spend more time between nuclei, than anywhere else in space. These electrons cause the nuclei to be attracted to each other, and this attraction results in the bond. However, this assembly cannot collapse to a size dictated by the volumes of these individual particles. Due to the matter wave nature of electrons and their smaller mass, they occupy a much larger amount of volume compared with the nuclei, and this volume occupied by the electrons keeps the atomic nuclei relatively far apart, as compared with the size of the nuclei themselves.
In general, strong chemical bonding is associated with the sharing or transfer of electrons between the participating atoms. The atoms in molecules, crystals, metals and diatomic gases— indeed most of the physical environment around us— are held together by chemical bonds, which dictate the structure of matter.

Overview of main types of chemical bonds

In the simplest view of a so-called 'covalent' bond, one or more electrons (often a pair of electrons) are drawn into the space between the two atomic nuclei. Here the negatively charged electrons are attracted to the positive charges of both nuclei, instead of just their own. This overcomes the repulsion between the two positively charged nuclei of the two atoms, and so this overwhelming attraction holds the two nuclei in a fixed configuration of equilibrium, even though they will still vibrate at equilibrium position. In summary, covalent bonding involves sharing of electrons in which the positively charged nuclei of two or more atoms simultaneously attract the negatively charged electrons that are being shared. In a polar covalent bond, one or more electrons are unequally shared between two nuclei.
In a simplified view of an ionic bond, the bonding electron is not shared at all, but transferred. In this type of bond, the outer atomic orbital of one atom has a vacancy which allows addition of one or more electrons. These newly added electrons potentially occupy a lower energy-state (effectively closer to more nuclear charge) than they experience in a different atom. Thus, one nucleus offers a more tightly bound position to an electron than does another nucleus, with the result that one atom may transfer an electron to the other. This transfer causes one atom to assume a net positive charge, and the other to assume a net negative charge. The bond then results from electrostatic attraction between atoms, and the atoms become positive or negatively charged ions.
The last and rarely mentioned type of bonding is metallic bond.
All bonds can be explained by quantum theory, but, in practice, simplification rules allow chemists to predict the strength, directionality, and polarity of bonds. The octet rule and VSEPR theory are two examples. More sophisticated theories are valence bond theory which includes orbital hybridization and resonance, and the linear combination of atomic orbitals molecular orbital method which includes ligand field theory. Electrostatics are used to describe bond polarities and the effects they have on chemical substances.

History

Early speculations into the nature of the chemical bond, from as early as the 12th century, supposed that certain types of chemical species were joined by a type of chemical affinity. In 1704, Isaac Newton famously outlined his atomic bonding theory, in "Query 31" of his Opticks, whereby atoms attach to each other by some "force". Specifically, after acknowledging the various popular theories in vogue at the time, of how atoms were reasoned to attach to each other, i.e. "hooked atoms", "glued together by rest", or "stuck together by conspiring motions", Newton states that he would rather infer from their cohesion, that "particles attract one another by some force, which in immediate contact is exceedingly strong, at small distances performs the chemical operations, and reaches not far from the particles with any sensible effect."
In 1819, on the heels of the invention of the voltaic pile, Jöns Jakob Berzelius developed a theory of chemical combination stressing the electronegative and electropositive character of the combining atoms. By the mid 19th century, Edward Frankland, F.A. Kekule, A.S. Couper, A.M. Butlerov, and Hermann Kolbe, building on the theory of radicals, developed the theory of valency, originally called "combining power", in which compounds were joined owing to an attraction of positive and negative poles. In 1916, chemist Gilbert N. Lewis developed the concept of the electron-pair bond, in which two atoms may share one to six electrons, thus forming the single electron bond, a single bond, a double bond, or a triple bond; in Lewis's own words, "An electron may form a part of the shell of two different atoms and cannot be said to belong to either one exclusively."[1]
That same year, Walther Kossel put forward a theory similar to Lewis' only his model assumed complete transfers of electrons between atoms, and was thus a model of ionic bonds. Both Lewis and Kossel structured their bonding models on that of Abegg's rule (1904).
In 1927, the first mathematically complete quantum description of a simple chemical bond, i.e. that produced by one electron in the hydrogen molecular ion, H2+, was derived by the Danish physicist Oyvind Burrau.[2] This work showed that the quantum approach to chemical bonds could be fundamentally and quantitatively correct, but the mathematical methods used could not be extended to molecules containing more than one electron. A more practical, albeit less quantitative, approach was put forward in the same year by Walter Heitler and Fritz London. The Heitler-London method forms the basis of what is now called valence bond theory. In 1929, the linear combination of atomic orbitals molecular orbital method (LCAO) approximation was introduced by Sir John Lennard-Jones, who also suggested methods to derive electronic structures of molecules of F2 (fluorine) and O2 (oxygen) molecules, from basic quantum principles. This molecular orbital theory represented a covalent bond as an orbital formed by combining the quantum mechanical Schrödinger atomic orbitals which had been hypothesized for electrons in single atoms. The equations for bonding electrons in multi-electron atoms could not be solved to mathematical perfection (i.e., analytically), but approximations for them still gave many good qualitative predictions and results. Most quantitative calculations in modern quantum chemistry use either valence bond or molecular orbital theory as a starting point, although a third approach, Density Functional Theory, has become increasingly popular in recent years.
In 1935, H. H. James and A. S. Coolidge carried out a calculation on the dihydrogen molecule that, unlike all previous calculation which used functions only of the distance of the electron from the atomic nucleus, used functions which also explicitly added the distance between the two electrons.[3] With up to 13 adjustable parameters they obtained a result very close to the experimental result for the dissociation energy. Later extensions have used up to 54 parameters and give excellent agreement with experiment. This calculation convinced the scientific community that quantum theory could give agreement with experiment. However this approach has none of the physical pictures of the valence bond and molecular orbital theories and is difficult to extend to larger molecules.

Valence bond theory

In 1927, valence bond theory was formulated and it argues that a chemical bond forms when two valence electrons, in their respective atomic orbitals, work or function to hold two nuclei together, by virtue of effects of lowering system energies. Building on this theory, the chemist Linus Pauling published in 1931 what some consider one of the most important papers in the history of chemistry: "On the Nature of the Chemical Bond". In this paper, elaborating on the works of Lewis, and the valence bond theory (VB) of Heitler and London, and his own earlier works, Pauling presented six rules for the shared electron bond, the first three of which were already generally known:
1. The electron-pair bond forms through the interaction of an unpaired electron on each of two atoms.
2. The spins of the electrons have to be opposed.
3. Once paired, the two electrons cannot take part in additional bonds.
His last three rules were new:
4. The electron-exchange terms for the bond involves only one wave function from each atom.
5. The available electrons in the lowest energy level form the strongest bonds.
6. Of two orbitals in an atom, the one that can overlap the most with an orbital from another atom will form the strongest bond, and this bond will tend to lie in the direction of the concentrated orbital.
Building on this article, Pauling's 1939 textbook: On the Nature of the Chemical Bond would become what some have called the "Bible" of modern chemistry. This book helped experimental chemists to understand the impact of quantum theory on chemistry. However, the later edition in 1959 failed to adequately address the problems that appeared to be better understood by molecular orbital theory. The impact of valence theory declined during the 1960s and 1970s as molecular orbital theory grew in usefulness as it was implemented in large digital computer programs. Since the 1980s, the more difficult problems of implementing valence bond theory into computer programs have been solved largely, and valence bond theory has seen a resurgence.

Comparison of valence bond and molecular orbital theory

In some respects valence bond theory is superior to molecular orbital theory. When applied to the simplest two-electron molecule, H2, valence bond theory, even at the simplest Heitler-London approach, gives a much closer approximation to the bond energy, and it provides a much more accurate representation of the behavior of the electrons as chemical bonds are formed and broken. In contrast simple molecular orbital theory predicts that the hydrogen molecule dissociates into a linear superposition of hydrogen atoms and positive and negative hydrogen ions, a completely unphysical result. This explains in part why the curve of total energy against interatomic distance for the valence bond method lies above the curve for the molecular orbital method at all distances and most particularly so for large distances. This situation arises for all homonuclear diatomic molecules and is particularly a problem for F2, where the minimum energy of the curve with molecular orbital theory is still higher in energy than the energy of two F atoms.
The concepts of hybridization are so versatile, and the variability in bonding in most organic compounds is so modest, that valence bond theory remains an integral part of the vocabulary of organic chemistry. However, the work of Friedrich Hund, Robert Mulliken, and Gerhard Herzberg showed that molecular orbital theory provided a more appropriate description of the spectroscopic, ionization and magnetic properties of molecules. The deficiencies of valence bond theory became apparent when hypervalent molecules (e.g. PF5) were explained without the use of d orbitals that were crucial to the bonding hybridisation scheme proposed for such molecules by Pauling. Metal complexes and electron deficient compounds (e.g. diborane) also appeared to be well described by molecular orbital theory, although valence bond descriptions have been made.
In the 1930s the two methods strongly competed until it was realised that they are both approximations to a better theory. If we take the simple valence bond structure and mix in all possible covalent and ionic structures arising from a particular set of atomic orbitals, we reach what is called the full configuration interaction wave function. If we take the simple molecular orbital description of the ground state and combine that function with the functions describing all possible excited states using unoccupied orbitals arising from the same set of atomic orbitals, we also reach the full configuration interaction wavefunction. It can be then seen that the simple molecular orbital approach gives too much weight to the ionic structures, while the simple valence bond approach gives too little. This can also be described as saying that the molecular orbital approach is too delocalised, while the valence bond approach is too localised.
The two approaches are now regarded as complementary, each providing its own insights into the problem of chemical bonding. Modern calculations in quantum chemistry usually start from (but ultimately go far beyond) a molecular orbital rather than a valence bond approach, not because of any intrinsic superiority in the former but rather because the MO approach is more readily adapted to numerical computations. However better valence bond programs are now available.

Bonds in chemical formulas

The fact that atoms and molecules are three-dimensional makes it difficult to use a single technique for indicating orbitals and bonds. In molecular formulas the chemical bonds (binding orbitals) between atoms are indicated by various different methods according to the type of discussion. Sometimes, they are completely neglected. For example, in organic chemistry chemists are sometimes concerned only with the functional groups of the molecule. Thus, the molecular formula of ethanol (a compound in alcoholic beverages) may be written in a paper in conformational, three-dimensional, full two-dimensional (indicating every bond with no three-dimensional directions), compressed two-dimensional (CH3–CH2–OH), separating the functional group from another part of the molecule (C2H5OH), or by its atomic constituents (C2H6O), according to what is discussed. Sometimes, even the non-bonding valence shell electrons (with the two-dimensional approximate directions) are marked, i.e. for elemental carbon .'C'. Some chemists may also mark the respective orbitals, i.e. the hypothetical ethene−4 anion (\/C=C/\ −4) indicating the possibility of bond formation.

Strong chemical bonds

Typical bond lengths in pm
and bond energies in kJ/mol.

Bond lengths can be converted to Å
by division by 100 (1 Å = 100 pm).
Data taken from [1].
Bond Length
(pm)
Energy
(kJ/mol)
H — Hydrogen
H–H 74 436
H–O 96 366
H–F 92 568
H–Cl 127 432
C — Carbon
C–H 109 413
C–C 154 348
C=C 134 614
C≡C 120 839
C–N 147 308
C–O 143 360
C–F 134 488
C–Cl 177 330
N — Nitrogen
N–H 101 391
N–N 145 170
N≡N 110 945
O — Oxygen
O–O 148 145
O=O 121 498
F, Cl, Br, I — Halogens
F–F 142 158
Cl–Cl 199 243
Br–H 141 366
Br–Br 228 193
I–H 161 298
I–I 267 151
Strong chemical bonds are the intramolecular forces which hold atoms together in molecules. A strong chemical bond is formed from the transfer or sharing of electrons between atomic centers and relies on the electrostatic attraction between the protons in nuclei and the electrons in the orbitals. Although these bonds typically involve the transfer of integer numbers of electrons (this is the bond order, which respresents one transferred electron or two shared electrons), some systems can have intermediate numbers of bonds. An example of this is the organic molecule benzene, where the bond order is 1.5 for each carbon atom, meaning that it has 1.5 bonds (shares three electrons) with each one of its two neighbors.
The types of strong bond differ due to the difference in electronegativity of the constituent elements. A large difference in electronegativity leads to more polar (ionic) character in the bond.

Covalent bond

Covalent bonding is a common type of bonding, in which the electronegativity difference between the bonded atoms is small or nonexistent. Bonds within most organic compounds are described as covalent. See sigma bonds and pi bonds for LCAO-description of such bonding.
A polar covalent bond is a covalent bond with a significant ionic character. This means that the electrons are closer to one of the atoms than the other, creating an imbalance of charge. They occur as a bond between two atoms with moderately different electronegativities, and give rise to dipole-dipole interactions. The electronegativity of these bonds is 0.3 to 1.7 .
A coordinate covalent bond is one where both bonding electrons are from one of the atoms involved in the bond. These bonds give rise to Lewis acids and bases. The electrons are shared roughly equally between the atoms in contrast to ionic bonding. Such bonding occurs in molecules such as the ammonium ion (NH4+) and are shown by an arrow pointing to the Lewis acid. Also known as non-polar covalent bond, the electronegativity of these bonds range from 0 to 0.3.
Molecules which are formed primarily from non-polar covalent bonds are often immiscible in water or other polar solvents, but much more soluble in non-polar solvents such as hexane.

Ionic bond

Ionic bonding is a type of electrostatic interaction between atoms which have a large electronegativity difference. There is no precise value that distinguishes ionic from covalent bonding, but a difference of electronegativity of over 1.7 is likely to be ionic, and a difference of less than 1.7 is likely to be covalent.[4] Ionic bonding leads to separate positive and negative ions. Ionic charges are commonly between −3e to +3e. Ionic bonding commonly occurs in metal salts such as sodium chloride (table salt). A typical feature of ionic bonds is that the species form into ionic crystals, in which no ion is specifically paired with any single other ion, in a specific directional bond. Rather, each species of ion is surrounded by ions of the opposite charge, and the spacing between it and each of the oppositely charged ions near it, is the same for all surrounding atoms of the same type. It is thus no longer possible to associate an ion with any specific other single ionized atom near it. This is a situation unlike that in covalent crystals, where covalent bonds between specific atoms are still discernable from the shorter distances between them, as measured by with such techniques as X-ray diffraction.
Ionic crystals may contain a mixture of covalent and ionic species, as for example salts of complex acids, such as sodium cyanide, NaCN. Many minerals are of this type. X-ray diffration shows that in NaCN, for example, the bonds between sodium cations (Na+) and the cyanide anions (CN-) are ionic, with no sodium ion associated with any particular cyanide. However, the bonds between C and N atoms in cyanide are of the covalent type, making each of the carbon and nitrogen associated with just one of its opposite type, to which it is physically much closer than it is to other carbons or nitrogens in a sodium cyanide crystal.
When such salts dissolve into water, the ionic bonds are typically broken by the interaction with water, but the covalent bonds continue to hold. In solution, the cyanide ions, still bound together as single CN- ions, move independently through the solution, as do sodium ions, as Na+. These charged ions move apart because each of them are more strongly attracted to a number of water molecules, than to each other. The attraction between ions and water molecules in such solutions is due to a type of weak dipole-dipole type chemical bond.

One- and three-electron bonds

Bonds with one or three electrons can be found in radical species, which have an odd number of electrons. The simplest example of a 1-electron bond is found in the hydrogen molecular cation, H2+. One-electron bonds often have about half the bond energy of a 2-electron bond, and are therefore called "half bonds". However, there are exceptions: in the case of dilithium, the bond is actually stronger for the 1-electron Li2+ than for the 2-electron Li2. This exception can be explained in terms of hybridization and inner-shell effects.[5]
The simplest example of three-electron bonding can be found in the helium dimer cation, He2+, and can also be considered a "half bond" because, in molecular orbital terms, the third electron is in an anti-bonding orbital which cancels out half of the bond formed by the other two electrons. Another example of a molecule containing a 3-electron bond, in addition to two 2-electron bonds, is nitric oxide, NO. The oxygen molecule, O2 can also be regarded as having two 3-electron bonds and one 2-electron bond, which accounts for its paramagnetism and its formal bond order of 2.[6]
Molecules with odd-electron bonds are usually highly reactive. These types of bond are only stable between atoms with similar electronegativities.[6]

Bent bonds

Bent bonds, also known as banana bonds, are bonds in strained or otherwise sterically hindered molecules whose binding orbitals are forced into a banana-like form. Bent bonds are often more susceptible to reactions than ordinary bonds.

3c-2e and 3c-4e bonds

In three-center two-electron bonds ("3c–2e") three atoms share two electrons in bonding. This type of bonding occurs in electron deficient compounds like diborane. Each such bond (2 per molecule in diborane) contains a pair of electrons which connect the boron atoms to each other in a banana shape, with a proton (nucleus of a hydrogen atom) in the middle of the bond, sharing electrons with both boron atoms.
Three-center four-electron bonds ("3c–4e") also exist which explain the bonding in hypervalent molecules. In certain cluster compounds, so-called four-center two-electron bonds also have been postulated.
In certain conjugated π (pi) systems, such as benzene and other aromatic compounds (see below), and in conjugated network solids such as graphite, the electrons in the conjugated system of π-bonds are spread over as many nuclear centers as exist in the molecule, or the network.

Aromatic bond

In organic chemistry, certain configurations of electrons and orbitals infer extra stability to a molecule. This occurs when π orbitals overlap and combine with others on different atomic centres, forming a long range bond. For a molecule to be aromatic, it must obey Hückel's rule, where the number of π electrons fit the formula 4n + 2, where n is an integer. The bonds involved in the aromaticity are all planar.
In benzene, the prototypical aromatic compound, 18 (n = 4) bonding electrons bind 6 carbon atoms together to form a planar ring structure. The bond "order" (average number of bonds) between the different carbon atoms may be said to be (18/6)/2=1.5, but in this case the bonds are all identical from the chemical point of view. They may sometimes be written as single bonds alternating with double bonds, but the view of all ring bonds as being equivalently about 1.5 bonds in strength, is much closer to truth.
In the case of heterocyclic aromatics and substituted benzenes, the electronegativity differences between different parts of the ring may dominate the chemical behaviour of aromatic ring bonds, which otherwise are equivalent.

Metallic bond

In a metallic bond, bonding electrons are delocalized over a lattice of atoms. By contrast, in ionic compounds, the locations of the binding electrons and their charges are static. The freely-moving or delocalization of bonding electrons leads to classical metallic properties such as shininess (surface light reflectivity), electrical and thermal conductivity, ductility, and high tensile strength.

Intermolecular bonding

There are four basic types of bonds that can be formed between two or more (otherwise non-associated) molecules, ions or atoms. Intermolecular forces cause molecules to be attracted or repulsed by each other. Often, these define some of the physical characteristics (such as the melting point) of a substance.
  • A large difference in electronegativity between two bonded atoms will cause a permanent charge separation, or dipole, in a molecule or ion. Two or more molecules or ions with permanent dipoles can interact in dipole-dipole interactions. The bonding electrons in a molecule or ion will, on average, be closer to the more electronegative atom more frequently than the less electronegative one, giving rise to partial charges on each atom, and causing electrostatic forces between molecules or ions.
  • A hydrogen bond is effectively a strong example of a permanent dipole. The large difference in electronegativities between hydrogen and any of fluorine, nitrogen and oxygen, coupled with their lone pairs of electrons cause strong electrostatic forces between molecules. Hydrogen bonds are responsible for the high boiling points of water and ammonia with respect to their heavier analogues.
  • The London dispersion force arises due to instantaneous dipoles in neighbouring atoms. As the negative charge of the electron is not uniform around the whole atom, there is always a charge imbalance. This small charge will induce a corresponding dipole in a nearby molecule; causing an attraction between the two. The electron then moves to another part of the electron cloud and the attraction is broken.

Summary: electrons in chemical bonds

In the (unrealistic) limit of "pure" ionic bonding, electrons are perfectly localized on one of the two atoms in the bond. Such bonds can be understood by classical physics. The forces between the atoms are characterized by isotropic continuum electrostatic potentials. Their magnitude is in simple proportion to the charge difference.
Covalent bonds are better understood by valence bond theory or molecular orbital theory. The properties of the atoms involved can be understood using concepts such as oxidation number. The electron density within a bond is not assigned to individual atoms, but is instead delocalized between atoms. In valence bond theory, the two electrons on the two atoms are coupled together with the bond strength depending on the overlap between them. In molecular orbital theory, the linear combination of atomic orbitals (LCAO) helps describe the delocalized molecular orbital structures and energies based on the atomic orbitals of the atoms they came from. Unlike pure ionic bonds, covalent bonds may have directed anisotropic properties. These may have their own names, such as sigma bond and pi bond.
In the general case, atoms form bonds that are intermediates between ionic and covalent, depending on the relative electronegativity of the atoms involved. This type of bond is sometimes called polar covalent.

Saturday, 1 October 2011

Radioactive decay

 

Radioactive decay is the process by which an atomic nucleus of an unstable atom loses energy by emitting ionizing particles (ionizing radiation). The emission is spontaneous, in that the atom decays without any interaction with another particle from outside the atom. Usually, radioactive decay happens due to a process confined to the nucleus of the unstable atom, but, on occasion (as with the different processes of electron capture and internal conversion), an inner electron of the radioactive atom is also necessary to the process.
Radioactive decay is a stochastic (i.e., random) process at the level of single atoms, in that, according to quantum theory, it is impossible to predict when a given atom will decay.[1] However, the chance that a given atom will decay is constant over time, so that given a large number of identical atoms (nuclides), the decay rate for the collection is predictable to the extent allowed by the law of large numbers.
The decay, or loss of energy, results when an atom with one type of nucleus, called the parent radionuclide, transforms to an atom with a nucleus in a different state, or a different nucleus, either of which is named the daughter nuclide. Often the parent and daughter are different chemical elements, and in such cases the decay process results in nuclear transmutation. In an example of this, a carbon-14 atom (the "parent") emits radiation (a beta particle, antineutrino, and a gamma ray) and transforms to a nitrogen-14 atom (the "daughter"). By contrast, there exist two types of radioactive decay processes (gamma decay and internal conversion decay) that do not result in transmutation, but only decrease the energy of an excited nucleus. This results in an atom of the same element as before but with a nucleus in a lower energy state. An example is the nuclear isomer technetium-99m decaying, by the emission of a gamma ray, to an atom of technetium-99.
Nuclides produced by radioactive decay are called radiogenic nuclides, whether they themselves are stable or not. There exist stable radiogenic nuclides that were formed from short-lived extinct radionuclides in the early solar system[citation needed]. The extra presence of stable radiogenic nuclides against the background of primordial stable nuclides can be inferred by various means. Presently-radioactive nuclides are from three sources: many naturally-occurring radionuclides are short-lived radiogenic nuclides that are the daughters of ongoing radioactive primordial nuclides (types of radioactive atoms that have been present since the beginning of the Earth and solar system). Other naturally-occurring radioactive nuclides are cosmogenic nuclides, formed by cosmic ray bombardment of material in the Earth's atmosphere or crust. Finally, some primordial nuclides are radioactive, but are so long-lived that they remain present from the primordial solar nebula. For a summary table showing the number of stable nuclides and of radioactive nuclides in each category, see radionuclide.
The SI unit of activity is the becquerel (Bq). One Bq is defined as one transformation (or decay) per second. Since any reasonably-sized sample of radioactive material contains many atoms, a Bq is a tiny measure of activity; amounts on the order of GBq (gigabecquerel, 1 x 109 decays per second) or TBq (terabecquerel, 1 x 1012 decays per second) are commonly used. Another unit of radioactivity is the curie, Ci, which was originally defined as the amount of radium emanation (radon-222) in equilibrium with one gram of pure radium, isotope Ra-226. At present it is equal, by definition, to the activity of any radionuclide decaying with a disintegration rate of 3.7 × 1010 Bq. The use of Ci is currently discouraged by the SI

 

Explanation

The trefoil symbol is used to indicate radioactive material.
The neutrons and protons that constitute nuclei, as well as other particles that approach close enough to them, are governed by several interactions. The strong nuclear force, not observed at the familiar macroscopic scale, is the most powerful force over subatomic distances. The electrostatic force is almost always significant, and, in the case of beta decay, the weak nuclear force is also involved.
The interplay of these forces produces a number of different phenomena in which energy may be released by rearrangement of particles in the nucleus or the change of one particle into others. The rearrangement is hindered energetically, so that it does not occur immediately. Random quantum vacuum fluctuations are theorized to promote relaxation to a lower energy state (the "decay") in a phenomenon known as quantum tunneling.
One might draw an analogy with a snowfield on a mountain: While friction between the ice crystals may be supporting the snow's weight, the system is inherently unstable with regard to a state of lower potential energy. A disturbance would thus facilitate the path to a state of greater entropy: The system will move towards the ground state, producing heat, and the total energy will be distributable over a larger number of quantum states. Thus, an avalanche results. The total energy does not change in this process, but, because of the law of entropy, avalanches happen only in one direction and that is toward the "ground state" — the state with the largest number of ways in which the available energy could be distributed.
Such a collapse (a decay event) requires a specific activation energy. For a snow avalanche, this energy comes as a disturbance from outside the system, although such disturbances can be arbitrarily small. In the case of an excited atomic nucleus, the arbitrarily small disturbance comes from quantum vacuum fluctuations. A radioactive nucleus (or any excited system in quantum mechanics) is unstable, and can, thus, spontaneously stabilize to a less-excited system. The resulting transformation alters the structure of the nucleus and results in the emission of either a photon or a high-velocity particle that has mass (such as an electron, alpha particle, or other type).

Discovery

Radioactivity was first discovered during 1896 by the French scientist Henri Becquerel, while working on phosphorescent materials. These materials glow in the dark after exposure to light, and he suspected that the glow produced in cathode ray tubes by X-rays might be associated with phosphorescence. He wrapped a photographic plate in black paper and placed various phosphorescent salts on it. All results were negative until he used uranium salts. The result with these compounds was a blackening of the plate. These radiations were called Becquerel Rays.
It soon became clear that the blackening of the plate did not have anything to do with phosphorescence, because the plate blackened when the mineral was in the dark. Non-phosphorescent salts of uranium and metallic uranium also blackened the plate. It was clear that there is a form of radiation that could pass through paper that was causing the plate to become black.
At first it seemed that the new radiation was similar to the then recently-discovered X-rays. Further research by Becquerel, Ernest Rutherford, Paul Villard, Pierre Curie, Marie Curie, and others discovered that this form of radioactivity was significantly more complicated. Different types of decay can occur, producing very different types of radiation. Rutherford was the first to realize that they all occur with the same mathematical exponential formula (see below), and to realize that many decay processes resulted in the transmutation of one element to another.
The early researchers also discovered that many other chemical elements besides uranium have radioactive isotopes. A systematic search for the total radioactivity in uranium ores also guided Marie Curie to isolate a new element polonium and to separate a new element radium from barium. The two elements' chemical similarity would otherwise have made them difficult to distinguish.

Danger of radioactive substances

The danger classification sign of radioactive materials
Alpha particles may be completely stopped by a sheet of paper, beta particles by aluminum shielding. Gamma rays can only be reduced by much more substantial barriers, such as a very thick layer of lead.
Different types of decay of a radionuclide. Vertical: atomic number Z, Horizontal: neutron number N
The dangers of radioactivity and radiation were not immediately recognized. Acute effects of radiation were first observed in the use of X-rays when electrical engineer and physicist Nikola Tesla intentionally subjected his fingers to X-rays during 1896.[2] He published his observations concerning the burns that developed, though he attributed them to ozone rather than to X-rays. His injuries healed later.
The genetic effects of radiation, including the effect on cancer risk, were recognized much later. During 1927, Hermann Joseph Muller published research showing genetic effects, and in 1946 was awarded the Nobel prize for his findings.
Before the biological effects of radiation were known, many physicians and corporations had begun marketing radioactive substances as patent medicine, glow-in-the-dark pigments, and radioactive quackery. Examples were radium enema treatments, and radium-containing waters to be drunk as tonics. Marie Curie protested this sort of treatment, warning that the effects of radiation on the human body were not well understood (Curie later died from aplastic anemia, which was likely caused by exposure to ionizing radiation). By the 1930s, after a number of cases of bone necrosis and death in enthusiasts, radium-containing medical products had been largely removed from the market.

Types of decay

As for types of radioactive radiation, it was found that an electric or magnetic field could split such emissions into three types of beams. For lack of better terms, the rays were given the alphabetic names alpha, beta, and gamma, still in use today. While alpha decay was seen only in heavier elements (atomic number 52, tellurium, and greater), the other two types of decay were seen in all of the elements.
In analyzing the nature of the decay products, it was obvious from the direction of electromagnetic forces produced upon the radiations by external magnetic and electric fields that alpha rays carried a positive charge, beta rays carried a negative charge, and gamma rays were neutral. From the magnitude of deflection, it was clear that alpha particles were much more massive than beta particles. Passing alpha particles through a very thin glass window and trapping them in a discharge tube allowed researchers to study the emission spectrum of the resulting gas, and ultimately prove that alpha particles are helium nuclei. Other experiments showed the similarity between classical beta radiation and cathode rays: They are both streams of electrons. Likewise gamma radiation and X-rays were found to be similar high-energy electromagnetic radiation.
The relationship between types of decays also began to be examined: For example, gamma decay was almost always found associated with other types of decay, occurring at about the same time, or afterward. Gamma decay as a separate phenomenon (with its own half-life, now termed isomeric transition), was found in natural radioactivity to be a result of the gamma decay of excited metastable nuclear isomers, in turn created from other types of decay.
Although alpha, beta, and gamma were found most commonly, other types of decay were eventually discovered. Shortly after the discovery of the positron in cosmic ray products, it was realized that the same process that operates in classical beta decay can also produce positrons (positron emission). In an analogous process, instead of emitting positrons and neutrinos, some proton-rich nuclides were found to capture their own atomic electrons (electron capture), and emit only a neutrino (and usually also a gamma ray). Each of these types of decay involves the capture or emission of nuclear electrons or positrons, and acts to move a nucleus toward the ratio of neutrons to protons that has the least energy for a given total number of nucleons (neutrons plus protons).
Shortly after discovery of the neutron in 1932, it was discovered by Enrico Fermi that certain rare decay reactions yield neutrons as a decay particle (neutron emission). Isolated proton emission was eventually observed in some elements. It was also found that some heavy elements may undergo spontaneous fission into products that vary in composition. In a phenomenon called cluster decay, specific combinations of neutrons and protons (atomic nuclei) other than alpha particles (helium nuclei) were found to be spontaneously emitted from atoms, on occasion.
Other types of radioactive decay that emit previously seen particles were found, but by different mechanisms. An example is internal conversion, which results in electron and sometimes high-energy photon emission, even though it involves neither beta nor gamma decay. This type of decay (like isomeric transition gamma decay) did not transmute one element to another.
Rare events that involve a combination of two beta-decay type events happening simultaneously (see below) are known. Any decay process that does not violate conservation of energy or momentum laws (and perhaps other particle conservation laws) is permitted to happen, although not all have been detected. An interesting example (discussed in a final section) is bound state beta decay of rhenium-187. In this process, an inverse of electron capture, beta electron-decay of the parent nuclide is not accompanied by beta electron emission, because the beta particle has been captured into the K-shell of the emitting atom. An antineutrino, however, is emitted.

Decay modes in table form

Radionuclides can undergo a number of different reactions. These are summarized in the following table. A nucleus with mass number A and atomic number Z is represented as (A, Z). The column "Daughter nucleus" indicates the difference between the new nucleus and the original nucleus. Thus, (A − 1, Z) means that the mass number is one less than before, but the atomic number is the same as before.
Mode of decay Participating particles Daughter nucleus
Decays with emission of nucleons:
Alpha decay An alpha particle (A = 4, Z = 2) emitted from nucleus (A − 4, Z − 2)
Proton emission A proton ejected from nucleus (A − 1, Z − 1)
Neutron emission A neutron ejected from nucleus (A − 1, Z)
Double proton emission Two protons ejected from nucleus simultaneously (A − 2, Z − 2)
Spontaneous fission Nucleus disintegrates into two or more smaller nuclei and other particles —
Cluster decay Nucleus emits a specific type of smaller nucleus (A1, Z1) smaller than, or larger than, an alpha particle (A − A1, Z − Z1) + (A1, Z1)
Different modes of beta decay:
β− decay A nucleus emits an electron and an electron antineutrino (A, Z + 1)
Positron emission (β+ decay) A nucleus emits a positron and an electron neutrino (A, Z − 1)
Electron capture A nucleus captures an orbiting electron and emits a neutrino the daughter nucleus is left in an excited unstable state (A, Z − 1)
Bound state beta decay A nucleus beta decays to electron and antineutrino, but the electron is not emitted, as it is captured into an empty K-shell;the daughter nucleus is left in an excited and unstable state. This process is suppressed except in ionized atoms that have K-shell vacancies. (A, Z + 1)
Double beta decay A nucleus emits two electrons and two antineutrinos (A, Z + 2)
Double electron capture A nucleus absorbs two orbital electrons and emits two neutrinos – the daughter nucleus is left in an excited and unstable state (A, Z − 2)
Electron capture with positron emission A nucleus absorbs one orbital electron, emits one positron and two neutrinos (A, Z − 2)
Double positron emission A nucleus emits two positrons and two neutrinos (A, Z − 2)
Transitions between states of the same nucleus:
Isomeric transition Excited nucleus releases a high-energy photon (gamma ray) (A, Z)
Internal conversion Excited nucleus transfers energy to an orbital electron and it is ejected from the atom (A, Z)
Radioactive decay results in a reduction of summed rest mass, once the released energy (the disintegration energy) has escaped in some way (for example, the products might be captured and cooled, and the heat allowed to escape). Although decay energy is sometimes defined as associated with the difference between the mass of the parent nuclide products and the mass of the decay products, this is true only of rest mass measurements, where some energy has been removed from the product system. This is true because the decay energy must always carry mass with it, wherever it appears (see mass in special relativity) according to the formula E = mc2. The decay energy is initially released as the energy of emitted photons plus the kinetic energy of massive emitted particles (that is, particles that have rest mass). If these particles come to thermal equilibrium with their surroundings and photons are absorbed, then the decay energy is transformed to thermal energy, which retains its mass.
Decay energy therefore remains associated with a certain measure of mass of the decay system invariant mass. The energy of photons, kinetic energy of emitted particles, and, later, the thermal energy of the surrounding matter, all contribute to calculations of invariant mass of systems. Thus, while the sum of rest masses of particles is not conserved in radioactive decay, the system mass and system invariant mass (and also the system total energy) is conserved throughout any decay process.

Decay chains and multiple modes

The daughter nuclide of a decay event may also be unstable (radioactive). In this case, it will also decay, producing radiation. The resulting second daughter nuclide may also be radioactive. This can lead to a sequence of several decay events. Eventually, a stable nuclide is produced. This is called a decay chain (see this article for specific details of important natural decay chains).
Gamma-ray energy spectrum of 238U (inset). Gamma-rays are emitted by decaying nuclides, and the gamma-ray energy can be used to characterize the decay (which nuclide is decaying to which). Here, using the gamma-ray spectrum, several nuclides that are typical of the decay chain have been identified: 226Ra, 214Pb, 214Bi.
An example is the natural decay chain of 238U, which is as follows:
  • decays, through alpha-emission, with a half-life of 4.5 billion years to thorium-234
  • which decays, through beta-emission, with a half-life of 24 days to protactinium-234
  • which decays, through beta-emission, with a half-life of 1.2 minutes to uranium-234
  • which decays, through alpha-emission, with a half-life of 240 thousand years to thorium-230
  • which decays, through alpha-emission, with a half-life of 77 thousand years to radium-226
  • which decays, through alpha-emission, with a half-life of 1.6 thousand years to radon-222
  • which decays, through alpha-emission, with a half-life of 3.8 days to polonium-218
  • which decays, through alpha-emission, with a half-life of 3.1 minutes to lead-214
  • which decays, through beta-emission, with a half-life of 27 minutes to bismuth-214
  • which decays, through beta-emission, with a half-life of 20 minutes to polonium-214
  • which decays, through alpha-emission, with a half-life of 160 microseconds to lead-210
  • which decays, through beta-emission, with a half-life of 22 years to bismuth-210
  • which decays, through beta-emission, with a half-life of 5 days to polonium-210
  • which decays, through alpha-emission, with a half-life of 140 days to lead-206, which is a stable nuclide.
Some radionuclides may have several different paths of decay. For example, approximately 36% of bismuth-212 decays, through alpha-emission, to thallium-208 while approximately 64% of bismuth-212 decays, through beta-emission, to polonium-212. Both the thallium-208 and the polonium-212 are radioactive daughter products of bismuth-212, and both decay directly to stable lead-208.

Occurrence and applications

According to the Big Bang theory, stable isotopes of the lightest five elements (H, He, and traces of Li, Be, and B) were produced very shortly after the emergence of the universe, in a process called Big Bang nucleosynthesis. These lightest stable nuclides (including deuterium) survive to today, but any radioactive isotopes of the light elements produced in the Big Bang (such as tritium) have long since decayed. Isotopes of elements heavier than boron were not produced at all in the Big Bang, and these first five elements do not have any long-lived radioisotopes. Thus, all radioactive nuclei are, therefore, relatively young with respect to the birth of the universe, having formed later in various other types of nucleosynthesis in stars (in particular, supernovae), and also during ongoing interactions between stable isotopes and energetic particles. For example, carbon-14, a radioactive nuclide with a half-life of only 5730 years, is constantly produced in Earth's upper atmosphere due to interactions between cosmic rays and nitrogen.
Radioactive decay has been put to use in the technique of radioisotopic labeling, which is used to track the passage of a chemical substance through a complex system (such as a living organism). A sample of the substance is synthesized with a high concentration of unstable atoms. The presence of the substance in one or another part of the system is determined by detecting the locations of decay events.
On the premise that radioactive decay is truly random (rather than merely chaotic), it has been used in hardware random-number generators. Because the process is not thought to vary significantly in mechanism over time, it is also a valuable tool in estimating the absolute ages of certain materials. For geological materials, the radioisotopes and some of their decay products become trapped when a rock solidifies, and can then later be used (subject to many well-known qualifications) to estimate the date of the solidification. These include checking the results of several simultaneous processes and their products against each other, within the same sample. In a similar fashion, and also subject to qualification, the rate of formation of carbon-14 in various eras, the date of formation of organic matter within a certain period related to the isotope's half-life may be estimated, because the carbon-14 becomes trapped when the organic matter grows and incorporates the new carbon-14 from the air. Thereafter, the amount of carbon-14 in organic matter decreases according to decay processes that may also be independently cross-checked by other means (such as checking the carbon-14 in individual tree rings, for example).

Radioactive decay rates

The decay rate, or activity, of a radioactive substance are characterized by:
Constant quantities:
  • half-life — symbol t1/2 — the time taken for the activity of a given amount of a radioactive substance to decay to half of its initial value.
  • mean lifetime — symbol τ — the average lifetime of a radioactive particle.
  • decay constant — symbol λ — the inverse of the mean lifetime.
Although these are constants, they are associated with statistically random behavior of populations of atoms. In consequence predictions using these constants are less accurate for small number of atoms.
Time-variable quantities:
  • Total activity — symbol A — number of decays an object undergoes per second.
  • Number of particles — symbol N — the total number of particles in the sample.
  • Specific activity — symbol SA — number of decays per second per amount of substance. (The "amount of substance" can be the unit of either mass or volume.)
These are related as follows:
 t_{1/2} = \frac{\ln(2)}{\lambda} = \tau 
\ln(2)
 A =  - \frac{dN}{dt} =  \lambda N
 S_A a_0 = - \frac{dN}{dt}\bigg|_{t=0} = 
\lambda N_0
where a0 is the initial amount of active substance — substance that has the same percentage of unstable particles as when the substance was formed.

[edit] Activity measurements

The units in which activities are measured are: becquerel (symbol Bq) = one disintegration per second; curie (Ci) = 3.7 × 1010 Bq. Low activities are also measured in disintegrations per minute (dpm).

Decay timing

The decay of an unstable nucleus is entirely random and it is impossible to predict when a particular atom will decay.[1] However, it is equally likely to decay at any time. Therefore, given a sample of a particular radioisotope, the number of decay events −dN expected to occur in a small interval of time dt is proportional to the number of atoms present.
-\frac{dN}{dt} \propto N.
If N is the number of atoms, then the probability of decay (−dN/N) is proportional to dt:
 \left(-\frac{dN}{N} \right) = \lambda \cdot 
dt.
Particular radionuclides decay at different rates, each having its own decay constant (λ). The negative sign indicates that N decreases with each decay event. The solution to this first-order differential equation is the following function:
N(t) = N_0\,e^{-{\lambda}t} = N_0\,e^{-t/ 
\tau}. \,\!
Where N0 is the value of N at time zero (t = 0). The second equation recognizes that the differential decay constant λ has units of 1/time, and can thus also be represented as 1/τ, where τ is a characteristic time for the process. This characteristic time is called the time constant of the process. In radioactive decay, this process time constant is also the mean lifetime for decaying atoms. Each atom "lives" for a finite amount of time before it decays, and it may be shown that this mean lifetime is the arithmetic mean of all the atoms' lifetimes, and that it is τ, which again is related to the decay constant as follows:
\tau = \frac{1}{\lambda}.
Simulation of many identical atoms undergoing radioactive decay, starting with either 4 atoms (left) or 400 (right). The number at the top indicates how many half-lives have elapsed. Note the law of large numbers: With more atoms, the overall decay is less random.
The previous exponential function, in general, represents the result of exponential decay. Although the parent decay distribution follows an exponential, observations of decay times will be limited by a finite integer number of N atoms and follow Poisson statistics as a consequence of the random nature of the process.

Half-life

A more commonly used parameter is the half-life. Given a sample of a particular radionuclide, the half-life is the time taken for half the radionuclide's atoms to decay. The half-life is related to the decay constant as follows:
t_{1/2} = \frac{\ln 2}{\lambda} = \tau \ln 2.
This relationship between the half-life and the decay constant shows that highly radioactive substances are quickly spent, while those that radiate weakly endure longer. Half-lives of known radionuclides vary widely, from more than 1019 years (such as for very nearly stable nuclides, e.g., 209Bi), to 10−23 seconds for highly unstable ones.
The factor of ln2 in the above relations results from the fact that concept of "half-life" is merely a way of selecting a different base other than the natural base e for the lifetime expression. The time constant τ is the "1/e" life (time till only 1/e = about 36.8% remains) rather than the "1/2" life of a radionuclide where 50% remains (thus, τ is longer than t½). Thus, the following equation can easily be shown to be valid.
N(t) = N_0\,e^{-t/ \tau} =N_0\,2^{-t/t_{1/2}}.
 \,\!
Since radioactive decay is exponential with a constant probability, each process could as easily be described with a different constant time period that (for example) gave its "1/3-life" (how long until only 1/3 is left) or "1/10-life" (a time period till only 10% is left), and so on. Thus, the choice of τ and t½ for marker-times, are only for convenience, and from convention. They reflect a fundamental principle only in so much as they show that the same proportion of a given radioactive substance will decay, during any time-period that one chooses.
Example
A sample of 14C, whose half-life is 5730 years, has a decay rate of 14 disintegration per minute (dpm) per gram of natural carbon. An artifact is found to have radioactivity of 4 dpm per gram of its present C, how old is the artifact?
Using the above equation, we have:
 N = N_0\,e^{-t/ \tau},
where:  \frac{N}{ N_0} = 4/14 \approx 0.286,
 \tau = \frac{T_{1/2}}{\ln 2} \approx 8267 years,
 t = -\tau\,\ln\frac{N}{ N_0} \approx 10360 years.

[edit] Changing decay rates

The radioactive decay modes of electron capture and internal conversion are known to be slightly sensitive to chemical and environmental effects which change the electronic structure of the atom, which in turn affects the presence of 1s and 2s electrons that participate in the decay process. A small number of mostly light nuclides are affected. For example, chemical bonds can affect the rate of electron capture to a small degree (in general, less than 1%) depending on the proximity of electrons to the nucleus in beryllium. In 7Be, a difference of 0.9% has been observed between half-lives in metallic and insulating environments.[3] This relatively large effect is because beryllium is a small atom whose valence electrons are in 2s atomic orbitals, which are subject to electron capture in 7Be because (like all s atomic orbitals in all atoms) they naturally penetrate into the nucleus.
Rhenium-187 is a more spectacular example. 187Re normally beta decays to 187Os with a half-life of 41.6 × 109 y,[4] but studies using fully ionised 187Re atoms (bare nuclei) have found that this can decrease to only 33 y. This is attributed to "bound-state β- decay" of the fully ionised atom — the electron is emitted into the "K-shell" (1s atomic orbital), which cannot occur for neutral atoms in which all low-lying bound states are occupied.[5]
A number of experiments have found that decay rates of other modes of artificial and naturally-occurring radioisotopes are, to a high degree of precision, unaffected by external conditions such as temperature, pressure, the chemical environment, and electric, magnetic, or gravitational fields.[citation needed] Comparison of laboratory experiments over the last century, studies of the Oklo natural nuclear reactor (which exemplified the effects of thermal neutrons on nuclear decay), and astrophysical observations of the luminosity decays of distant supernovae (which occurred far away so the light has taken a great deal of time to reach us), for example, strongly indicate that decay rates have been constant (at least to within the limitations of small experimental errors) as a function of time as well.
Recent results suggest the possibility that decay rates might have a weak dependence (0.5% or less) on environmental factors. It has been suggested that measurements of decay rates of silicon-32, manganese-54, and radium-226 exhibit small seasonal variations (of the order of 0.1%), proposed to be related to either solar flare activity or distance from the sun.[6][7][8] However, such measurements are highly susceptible to systematic errors, and a subsequent paper[9] has found no evidence for such correlations in six other isotopes, and sets upper limits on the size of any such effects

Monday, 26 September 2011

Atomic physics

Atomic physics (or atom physics) is the field of physics that studies atoms as an isolated system of electrons and an atomic nucleus. It is primarily concerned with the arrangement of electrons around the nucleus and the processes by which these arrangements change. This includes ions as well as neutral atoms and, unless otherwise stated, for the purposes of this discussion it should be assumed that the term atom includes ions.
The term atomic physics is often associated with nuclear power and nuclear bombs, due to the synonymous use of atomic and nuclear in standard English. However, physicists distinguish between atomic physics—which deals with the atom as a system consisting of a nucleus and electrons, and nuclear physics—which considers atomic nuclei alone.
As with many scientific fields, strict delineation can be highly contrived and atomic physics is often considered in the wider context of atomic, molecular, and optical physics. Physics research groups are usually so classified.

Isolated atoms

Atomic physics always considers atoms in isolation. Atomic models will consist of a single nucleus which may be surrounded by one or more bound electrons. It is not concerned with the formation of molecules (although much of the physics is identical) nor does it examine atoms in a solid state as condensed matter. It is concerned with processes such as ionization and excitation by photons or collisions with atomic particles.
While modelling atoms in isolation may not seem realistic, if one considers atoms in a gas or plasma then the time-scales for atom-atom interactions are huge in comparison to the atomic processes that we are concerned with. This means that the individual atoms can be treated as if each were in isolation because for the vast majority of the time they are. By this consideration atomic physics provides the underlying theory in plasma physics and atmospheric physics even though both deal with huge numbers of atoms.

Electronic configuration

Electrons form notional shells around the nucleus. These are naturally in a ground state but can be excited by the absorption of energy from light (photons), magnetic fields, or interaction with a colliding particle (typically other electrons).
Electrons that populate a shell are said to be in a bound state. The energy necessary to remove an electron from its shell (taking it to infinity) is called the binding energy. Any quantity of energy absorbed by the electron in excess of this amount is converted to kinetic energy according to the conservation of energy. The atom is said to have undergone the process of ionization.
In the event the electron absorbs a quantity of energy less than the binding energy, it will transition to an excited state. After a statistically sufficient quantity of time, an electron in an excited state will undergo a transition to a lower state. The change in energy between the two energy levels must be accounted for (conservation of energy). In a neutral atom, the system will emit a photon of the difference in energy. However, if the excited atom has been previously ionized, particularly if one of its inner shell electrons has been removed, a phenomenon known as the Auger effect may take place where the quantity of energy is transferred to one of the bound electrons causing it to go into the continuum. This allows one to multiply ionize an atom with a single photon.
There are rather strict selection rules as to the electronic configurations that can be reached by excitation by light—however there are no such rules for excitation by collision processes.

History and developments

The majority of fields in physics can be divided between theoretical work and experimental work, and atomic physics is no exception. It is usually the case, but not always, that progress goes in alternate cycles from an experimental observation, through to a theoretical explanation followed by some predictions which may or may not be confirmed by experiment, and so on. Of course, the current state of technology at any given time can put limitations on what can be achieved experimentally and theoretically so it may take considerable time for theory to be refined.
One of the earliest steps towards atomic physics was the recognition that matter was composed of atoms, in the modern sense of the basic unit of a chemical element. This theory was developed by the British chemist and physicist John Dalton in the 18th century. At this stage, it wasn't clear what atoms were although they could be described and classified by their properties (in bulk) in a periodic table.
The true beginning of atomic physics is marked by the discovery of spectral lines and attempts to describe the phenomenon, most notably by Joseph von Fraunhofer. The study of these lines led to the Bohr atom model and to the birth of quantum mechanics. In seeking to explain atomic spectra an entirely new mathematical model of matter was revealed. As far as atoms and their electron shells were concerned, not only did this yield a better overall description, i.e. the atomic orbital model, but it also provided a new theoretical basis for chemistry (quantum chemistry) and spectroscopy.
Since the Second World War, both theoretical and experimental fields have advanced at a rapid pace. This can be attributed to progress in computing technology which has allowed larger and more sophisticated models of atomic structure and associated collision processes. Similar technological advances in accelerators, detectors, magnetic field generation and lasers have greatly assisted experimental work.